形状记忆合金隔振系统非线性动力特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Nonlinear Dynamic Characteristics of Shape Memory Alloy Vibration Isolation System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立双旗回环形状记忆合金隔振系统,利用平均法和稳定性分析,提出快速求解双旗回环形状记忆合金隔振系统的方法,得到4种形式的幅频曲线及其临界载荷,选出适用于隔振设计的幅频曲线形式,并通过传递率曲线验证其隔振效果,为隔振设计提供参考。求解峰值响应与载荷幅值的关系,从而可通过载荷大小判断幅频曲线形式,并判断峰值响应频率,为避免共振提供参考。研究滞回曲线参数对幅频曲线的影响,给出滞回曲线参数的建议取值区间,为形状记忆合金的设计制造提供参考。

    Abstract:

    The SMA vibration isolation system of double-flag ring is established, and the method of fast solving the SMA vibration isolation system of doubleflag ring is put forward by the average method and stability analysis. Four kinds of amplitudefrequency curves and their critical loads produced by different load amplitudes are obtained, the appropriate amplitude-frequency curve form for vibration isolation design is selected, and the vibration isolation effect is verified by the transmission rate curve. The results provide a reference for the design of vibration isolation. The relationship between the peak response and the load amplitude is solved, so that the amplitude-frequency curve form can be determined by the load size, and the peak response frequency can be determined to provide a reference for avoiding resonance. The influence of the parameters of the hysteresis curve on the amplitude-frequency curve is studied, and the recommended value range of the parameters of the hysteresis curve is given, which provides a reference for the design and manufacture of SMA.

    参考文献
    相似文献
    引证文献
引用本文

胡凡俊.形状记忆合金隔振系统非线性动力特性[J].中国海洋平台,2020,(05):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-11-06
  • 出版日期: